815 SteelKote IM Mastic AL

A surface tolerant, biobased two component, EPA compliant anti corrosive aluminum mastic primer/coating, based on special epoxy resins and a modified phenalkamine curing agent. 815 SteelKote IM Mastic AL is specially developed as a surface tolerant maintenance primer/coating on ST-2 cleaned surfaces, hand prepared steel and old paint systems, as well as Sa2½ blasted substrates. Early water resistance and good wetting properties enables application at high relative humidity (90%, damp surface). Recoatable with itself, epoxy and polyurethane coatings, vinyl and alkyd products. A very tight, impenetrable coating, resistant to abrasion, chemical impact and water immersion, even as a single coat system.

Product information

Features
• biobased mastic epoxy;
• heavy duty properties;
• NORSOK approved;
• immersion qualified;
• ocean proofed; splash zone resistant;
• super high solid;
• abrasion resistant;
• extreme mechanical properties;
• easy application;
• good curing at low temperatures (5°C);
• easy application by airless as well as by brush/roller;
• suitable for application up to and including C5-I, C5-M, IM-
• 1, IM-2, IM-3 environments according to ISO 12944;
• for outside applications this coating should be over
• coated to prevent chalking;
• in combination with 16738 UniCure Miox, Norsok M501
• system 7 (immersion) certified.

Performance and properties
Glans: Eggshell gloss
Volume solids: ± 80 volume % (mixed product)
VOC: ≤ 160 gr/ltr.

Dry times
At 50% RH and standard dry film thickness of 250 μm .
(method: BYK Drying recorder)
Dust free 4 hours
Manageable: 16 hours
Recoatable: 8 hours

Processing

Airless spray
Thinner n.a. 
Quantity 0 vol. %
Nozzle 0,015-0,017 inch
Flow pressure 150-175 bar
Dry film thickness 80-250 μm 

Airmix
Thinner EP5800
Quantity 5-10 vol.%
Nozzle 0,015-0,017 inch
Flow pressure 70-100 bar
Dry film thickness 80-250 μm

Brush-roller
Thinner S5102 
Quantity 0-5 vol %
Dry film thickness 80 μm 

Airspray
Thinner EP5800
Quantity 5-10 vol.%
Nozzle 2,0-3,0 mm
Flow pressure 3-4 bar
Dry film thickness 80-250 μm

Cleaning tools: Immediately after application using thinner EP5800.

Packaging

Packaging:

20 litre cans. Thinner in 25 litre jerry cans and 200 litre drums.

Shelf life:

In original well shut packaging 12 months, stored inside at temperatures between
5°C and 40°C.

Features
• biobased mastic epoxy;
• heavy duty properties;
• NORSOK approved;
• immersion qualified;
• ocean proofed; splash zone resistant;
• super high solid;
• abrasion resistant;
• extreme mechanical properties;
• easy application;
• good curing at low temperatures (5°C);
• easy application by airless as well as by brush/roller;
• suitable for application up to and including C5-I, C5-M, IM-
• 1, IM-2, IM-3 environments according to ISO 12944;
• for outside applications this coating should be over
• coated to prevent chalking;
• in combination with 16738 UniCure Miox, Norsok M501
• system 7 (immersion) certified.

Performance and properties
Glans: Eggshell gloss
Volume solids: ± 80 volume % (mixed product)
VOC: ≤ 160 gr/ltr.

Dry times
At 50% RH and standard dry film thickness of 250 μm .
(method: BYK Drying recorder)
Dust free 4 hours
Manageable: 16 hours
Recoatable: 8 hours

Airless spray
Thinner n.a. 
Quantity 0 vol. %
Nozzle 0,015-0,017 inch
Flow pressure 150-175 bar
Dry film thickness 80-250 μm 

Airmix
Thinner EP5800
Quantity 5-10 vol.%
Nozzle 0,015-0,017 inch
Flow pressure 70-100 bar
Dry film thickness 80-250 μm

Brush-roller
Thinner S5102 
Quantity 0-5 vol %
Dry film thickness 80 μm 

Airspray
Thinner EP5800
Quantity 5-10 vol.%
Nozzle 2,0-3,0 mm
Flow pressure 3-4 bar
Dry film thickness 80-250 μm

Cleaning tools: Immediately after application using thinner EP5800.

Packaging:

20 litre cans. Thinner in 25 litre jerry cans and 200 litre drums.

Shelf life:

In original well shut packaging 12 months, stored inside at temperatures between
5°C and 40°C.