806 SteelKote EP Miox

A universal anti corrosive high solids low aromatic EPA compliant epoxy coating, reinforced with micaceous iron ore. Applied as a single coat system it combines a high quality protection with easy application. Very good corrosion control and extreme sealing properties and mechanical strength. The product can be applied as a primer or coating on steel structures in aggressive atmospherical and industrial environments. Due to its high solids and low aromatic content it is highly recommended where emission of solvents need to be reduced and labour circumstances to be optimized. Very low odour impact.

Product information

Features
• extreme adhesion;
• extreme barrier properties;
• extreme corrosion resistance;
• extreme flexibility;
• NORSOK approved M501 specifications in atmospherical
• and industrial systems;
• ready to spray at 70% volume solids;
• resistant to water spill, various solvents and chemicals;
• for outside applications this coating should be over
• coated to prevent chalking;
• high flash point creates more safety during storage and
• application;
• very low Aware-code; favourable working conditions;
• very low odour impact.

Performance and properties
Gloss: Silky gloss
Volume solids: ca. 70 volume % (mixed product)
VOC: ≤ 250 gr/ltr.

Dry times
at a standard dry film thickness of 100 μm.
(method: BYK Drying recorder)
Dust free 2 hours
Manageable: 16 hours
Recoatable: 8 hours

Processing

Airless spray
Quantity 0 vol. %
Nozzle min 0,015 inch
Flow pressure 140-160 bar
Dry film thickness 80-160 μm

Airmix
Quantity 0 vol. %
Nozzle min 0,015 inch
Flow pressure 70-100 bar
Dry film thickness 80-160 μm

Brush-roller
Thinner EP5806 
Quantity 0-5 vol. %
Dry film thickness 80 μm 

Airspray
Thinner EP5806
Quantity 0-5 vol. %
Nozzle 2,0-2,5 mm
Flow pressure 3-4 bar
Dry film thickness 80-160 μm

Cleaning tools: Immediately after application using thinner EP5806.

Packaging

Packaging:

20 litre cans. Thinner in 25 litre jerry cans and 200 litre drums.

Shelf life:

In original well shut packaging 12 months, stored inside at temperatures between 5°C and 40°C.

Features
• extreme adhesion;
• extreme barrier properties;
• extreme corrosion resistance;
• extreme flexibility;
• NORSOK approved M501 specifications in atmospherical
• and industrial systems;
• ready to spray at 70% volume solids;
• resistant to water spill, various solvents and chemicals;
• for outside applications this coating should be over
• coated to prevent chalking;
• high flash point creates more safety during storage and
• application;
• very low Aware-code; favourable working conditions;
• very low odour impact.

Performance and properties
Gloss: Silky gloss
Volume solids: ca. 70 volume % (mixed product)
VOC: ≤ 250 gr/ltr.

Dry times
at a standard dry film thickness of 100 μm.
(method: BYK Drying recorder)
Dust free 2 hours
Manageable: 16 hours
Recoatable: 8 hours

Airless spray
Quantity 0 vol. %
Nozzle min 0,015 inch
Flow pressure 140-160 bar
Dry film thickness 80-160 μm

Airmix
Quantity 0 vol. %
Nozzle min 0,015 inch
Flow pressure 70-100 bar
Dry film thickness 80-160 μm

Brush-roller
Thinner EP5806 
Quantity 0-5 vol. %
Dry film thickness 80 μm 

Airspray
Thinner EP5806
Quantity 0-5 vol. %
Nozzle 2,0-2,5 mm
Flow pressure 3-4 bar
Dry film thickness 80-160 μm

Cleaning tools: Immediately after application using thinner EP5806.

Packaging:

20 litre cans. Thinner in 25 litre jerry cans and 200 litre drums.

Shelf life:

In original well shut packaging 12 months, stored inside at temperatures between 5°C and 40°C.